Here are just a few ideas we realized from Jeff Fulkerson when he visited our in-house jewellery studio final month. These are nice hints for starting jewellery makers or people who simply have to brush-up on the fundamentals!
Start with a sketch to experiment and decide the design of your piece. Outline the design parts you’ll use, fascinated about form, dimension and shade. Check again in along with your sketch as you regulate and make the completed piece.
When drilling stones, work in a water tub. Begin with a spherical burr to make a small divot within the stone, much like utilizing a middle punch when drilling via steel. Make a pilot gap with a smaller drill bit, then transfer as much as a bigger drill bit on the second go.
Begin sawing by making a small notch in your bench pin. Angle the noticed towards the steel contained in the notch to begin the road. Then, regulate your noticed so it’s straight up and down and let the noticed do the work.
Use the most well liked a part of the flame to warmth your steel, which is correct on the tip of the blue pencil contained in the flame. The orange a part of the flame will trigger your steel to show soiled, which might forestall good solder joins. In this photograph, the blue tip is touching the again of the steel.
Know that submitting solely happens when you find yourself pushing the file away from your self. Use the proper sort of file in your venture – for instance, don’t attempt to file a large piece of steel with a tiny needle file.
Jeff Fulkerson is a jewellery maker, teacher and artist who lives and works in San Diego. He travels the nation educating jewellery making courses. Next up, Jeff will likely be at BeadFest Philadelphia and Art Unraveled in Phoenix. Visit his web site for on-line jewellery making courses, together with a course on DIY bangles utilizing sample wire from Halsteadbead.com.